Xylan Coatings and PTFE Coating Supplier

Exact compliance with Teflon Coating Services, Chrome Oxide, Tungsten Carbide and Component Manufacturing for industrial, food grade, aerospace and government specs.

Xylan Coatings by Whitford are normally made use of to reduce friction, boost wear resistance, as well as for non-stick applications. Additionally, it can be utilized to protect a metal from deterioration. One of the most generally understood application is in non-stick pots and pans but Xylan Coatings have also been utilized thoroughly in the auto industry as well as for corrosion defense in the oil and gas sector. Xylan Coatings are generally used in all facets of manufacturing and prototype services.

Xylan is the umbrella hallmark for most of the Whitford Company fluoropolymer coverings line. Xylan Coatings are made from low friction, wear resistant composites of fluoropolymers and also reinforcing binder resins. Xylan  Coatings could be one-, two- (primer and top-coat), and also 3- (guide, mid-coat, top-coat) coat traditional as well as enhanced (filler) coating systems. The fluoropolymers used in Xylan coatings contain PTFE, PFA, and FEP. The properties listed below might not put on all Xylan finishes as the fluoropolymer and resin content and also could have considerable impacts on each property. [2]

Characteristic  Xylan Coatings  Tensile Strength (ASTM D1708)4000 – 5000 psi
Elongation (ASTM D4894)50 %.
Effect Strength (ASTM D256)13 ft – lb/in.
Firmness (ASTM D2240)60 – 90 HB (coast D).
Abrasion Resistance (Tabor)) 15 milligrams.
Coefficient of Friction (ASTM D1894).15 -.35 static.
Dielectric Toughness (ASTM D149)1400 volts per mil.
Use Temperature-100 ° F to 500 ° F max.
Thawing Pointn/a.
Thermal Conductivityn/a.
Chemical Resistance (ASTM D543)good.
Salt Spray Resistance (ASTM B117)excellent.
Water Absorption (ASTM D570)

More information on Xylan Coatings can be obtained at Performance Engineered Components

A Teflon coating is perfect for applications on aluminum, steel, steel alloys, stainless steel, brass, glass, fiberglass, and even plastic.

We also offer many base metal hard coat and ceramic underlays which enhance product life spans.

We are set up for small batch to full production runs.  Consulting service available to fulfill your every requirement.

Contact:  Chuck Donald for Inquiry’s  262 250 8460


Performance Engineered Components offers Teflon Coating Services, fabrication, prototypes  and many coating finishes to make a complete part.

WP2Social Auto Publish Powered By : XYZScripts.com