Are you tired of the bolts in your machinery wearing down?

Ready to try something new to extend the lifespan of your bolts and fasteners?

Teflon coated fasteners often end up being more cost efficient than their standard counterparts. You’ll need the right service and vendor to make sure you’ve got exactly what you need, however.

If you’re ready to start making an investment in Teflon coated fasteners then you should be reading this guide. We’ll discuss the ins and outs of the selection process in order to make sure that you’ve got exactly what you need.

Why Use Teflon Coated Fasteners?

Not all bolts and fasteners are created equally. When you’re using them in machinery one of the biggest complaints comes about from the limited lifespan.

This is due to a simple fact: metal tends to break down over time. Repeated wear and tear from being put in and pulled out chemical corrosion and the damage caused by repeated cycles of heat and cold all cause some serious damage.

A Teflon coating can help to reduce all of this.

Teflon has one of the lowest possible friction coefficients of any solid material.

Since it slides so easily against metal the lifespan of bolts treated in this fashion is much longer. There’s simply less tearing as the fastener is loosened and tightened. You’ll also find them getting stuck far less than an untreated bolt.

In addition to that, it’s a chemically resilient compound. A Teflon coated bolt isn’t going to rust nearly as quickly as its untreated counterpart.

Corrosion is a major factor in marine operations, around chemical plants, and anywhere else that you might come across a harsh environment. We’ve found that PTFE coated fasteners can still be removed with standard tools even after prolonged exposure that would render a regular bolt pretty much immobile.

A proper coating can also increase the sheer tension of the bolt. This allows it to take more force before breaking and reduces the instances of stuck fasteners which will then need to be drilled out or otherwise removed.

Basically, Teflon coated bolts and fasteners are superior to their standard counterparts in pretty much every way.

Picking a Teflon Coating Service

When you’re looking to invest in the nuts and bolts of your machinery you’ll want to shop around.

There are a few qualities that separate a good service from a bad one when you’re looking into chemical coatings. You should be looking for all of the following to ensure that you’ve got what you need.

Flexibility in Ordering Size

Sometimes you may need hundreds of fasteners, other times you may need only a couple dozen. When you’re looking to replace things in a hurry it helps to have a service which will allow you to order in different amounts.

In doing so you can avoid wasting money on fasteners that you won’t need for some time.

Wide Array of Parts

It’s best to be able to order everything from the same service, rather than having to pick and choose from several of them. When it comes down to it, there’s not a whole lot that needs to be handled for fasteners, but what if you want other parts coated eventually?

Working with just one company allows you to form a lasting working relationship and makes things easier for you.

Longevity in Industry

Look, we’re not saying that newcomers are bad. They just might not have the experience and expertise you need to make sure that you get good service from the outset.

Someone with thirty years in the industry, for instance, is likely to not only have a better understanding of the coatings you need but also be able to handle your business much better.

Code Compliance

Since PTFE is used for such a wide variety of different applications there are a number of codes surrounding the use of the coating. A company which isn’t in compliance is likely to have issues with quality control.

The International Organization of Standardization clearly lays out all of the requirements for a Teflon coating service.

Compliance with the ISO code is one of the biggest things you’ll need to look for when you’re trying to find a service for your business.

High-Quality Components

Even the best coating service isn’t going to be able to guarantee your bolts and fasteners will hold up to standards if they use subpar materials.

Going cheap is going to hurt you in the long run, whether it’s flawed in the coating or the underlying bolts and fasteners.

You need to make sure that you use a company which uses only the best. You don’t want to trust your machinery to something which can’t hold up over time.

A Company You Can Trust

If you’re looking for Teflon coated fasteners then you’ll need to work with someone whom you can trust.

The truth is that the biggest deviations in these extremely useful bits are always going to come from the service you’re getting them from. It might be tempting to just see what you can find but at the end of the day, your fasteners are vital pieces of everything you put them in.

It’s time to find what you need.

It’s time to use one of the best in the business.

If you think that you’re ready for the switch, then contact us and we’ll see what we can do for you.

WP2Social Auto Publish Powered By : XYZScripts.com
%d bloggers like this: