Polytetrafluoroethylene PTFE Teflon Coating Statistics

Polytetrafluoroethylene PTFE coating uses a one or two-coat (primer/topcoat) system. These products have the highest operating temperature of any fluoropolymer and have extremely low coefficient of friction, fair abrasion resistance and good chemical resistance.

A PTFE coating can withstand a maximum use temperature of 600 ° F. This coating is typically applied to a thickness of 1-3 mils.

Performance Engineerd Coatings offers a wide range of Polytetrafluoroethylene PTFE Teflon Coating Statistics to meet most of your application needs including FEP coatings, which have similar characteristics of PTFE coatings.  Both PTFE and FEP coatings are food grade coatings.  Performance Engineered Components offers all Teflon Coating Services in Milwaukee and the surrounding area.,,,.

PTFE Coating Statistics
Tensile Strength (ASTM D1708)3000-5000 psi
Elongation (ASTM D1457)300-500%
Impact Strength (ASTM D256)3.5 ft-LB/in
Hardness (ASTM D2240)50-65 HB (shore D)
Abrasion Resistance (Tabor)12 mg
Coefficient of Friction (ASTM D1894).12 -.15 static, .05 -.10 dynamic
Dielectric Strength (ASTM D149)450 volts per mil
Use Temperature600°F max
Melting Point625°F
Thermal Conductivity1.7 BTU-in/h-ft 2-°F
Chemical Resistance (ASTM D543)Excellent
Salt Spray Resistance (ASTM B117)Fair
Water Absorption (ASTM D570)< .01%
Thickness.001″ – .003″

Contact Performance Engineered Components for all your coating needs including:

Exact compliance with Teflon Coating Services, Chrome Oxide, Tungsten Carbide and coating specifications for industrial, food grade, aerospace and government specs.

Contact Chuck Donald at: 262 250 8460

WP2Social Auto Publish Powered By : XYZScripts.com
%d bloggers like this: